home *** CD-ROM | disk | FTP | other *** search
- | Riscy TNC Configuration File for KAM
- |
- | About the clock
- Auto clock set (Y/N) : Y
- Clock digits (4/6) : 6
- |
- | TNC modes - List the command strings or characters
- | required to get the TNC into these conditions
- |
- Command mode : Break
- Converse mode : Convers
- Transparent mode : Trans
- Enter Kiss : Intface KISS^^PERM^^RESET
- Exit Kiss : ÀÿÀ
- Packet : ^cX
- RTTY : RTTY 45
- ASCII : ASCII 110
- Amtor Listen : LAMTOR
- Amtor : AMTOR
- Fec : FEC
- Navtex : NAVTEX
- Pactor Listen : PTLISTEN
- Pactor : PACTOR
- CW :
- WEFAX :
- |
- | Information about ports
- | Describe Ports
- Port1 : HF
- Port2 : VHF
- Port3 :
- Port4 :
- Port5 :
- Port6 :
- Default Port : 2
- | Now the commands needed to use ports
- Stream Prefix : PORT
- First stream : A
- Port1 : ~
- Port2 : |
- Port3 :
- Port4 :
- Port5 :
- Port6 :
- |
- | Sequences needed to drive modes like RTTY, CW, ASCII etc.
- Transmit : ^cT
- Receive after Tx comp: ^cE
- Receive immediately : ^cR
- Invert : ^cI
- Change shift : ^cS
- |
- | Information about packet commands
- Command Prefix : ^c
- Connect : Connect
- Converse : ^c
- Disconnect : Disconnect
- |
- | Link Status messages which arrive from tnc
- Stream prefix : |
- Message Prefix : ***
- Connect msg : Connected to
- Disconnect msg : Disconnected